Fast simultaneous determination of 23 veterinary drug residues in fish,poultry, and red meat by liquid chromatography/tandem mass spectrometry

The misuses of veterinary drugs can result in the accumulation of residues in food of animal origin that can make its way to the final consumer. Herein we describe a simple method for the accurate determination of beta-lactams, quinolones, sulphonamides, and tetracyclines in fish, poultry, and red meat. No extraction cartridges were used; instead, the extraction process consisted of the addition of an organic solvents, shaking, centrifugation, and dilution. An extensive validation process demonstrated an excellent linearity (R² ≥ 0.99) for 23-drug residues. The recovery of drugs in different matrices at two concentration levels (n = 6) was in the range of 82–119%. The method was proved to be repeatable and reproducible with intra/inter-day measurements (RSDs lower than 20%). The quantification limits of drug residues were in the range of 0.8 to 45.3 ug/kg, which is well below the maximum residue limits set by most regulatory authorities. This method was successfully applied to the routine analysis of 20 fish, poultry, and red meat samples (n = 60).     

N-TiO2/ZnO复合纳米管阵列的掺杂机理及其光催化活性

以ZnO纳米柱阵列为模板, 采用溶胶-凝胶法制备出TiO2/ZnO和N掺杂TiO2/ZnO的复合纳米管阵列. 扫描电镜(SEM)、X射线光电子能谱(XPS)和紫外-可见漫反射吸收光谱(UV-Vis)的结果表明: 两种阵列的纳米管均为六角形结构, 直径约为100 nm, 壁厚约为20 nm; 在N-TiO2/ZnO复合纳米管阵列中, 掺入的N离子主要是以N-Ox、N-C和N-N的形式化学吸附在纳米管表面, 仅有少量的N离子以取代式掺杂的方式占据TiO2晶格O的位置; 表面N物种形成的表面态能级和取代式掺杂导致带隙的窄化, 增强了纳米管阵列的光吸收效率, 促进了光生载流子的分离. 光催化实验结果表明, N离子的掺杂有利于N-TiO2/ZnO复合纳米管阵列光催化活性的提高.     

交替三线性分解算法与反相高效液相-二极管阵列检测方法相结合同时测定苯二酚的位置异构体

 利用交替三线性分解算法与反相高效液相 二极管阵列检测 (RP HPLC DAD)相结合 ,在洗脱时间为1 0 86min～ 1 399min(间隔 1 / 1 50min)、紫外吸收波长为 2 68nm～ 2 98nm(间隔 1nm)时对苯二酚位置异构体的重叠及光谱体系进行了分辨研究。分辨结果与实际结果一致。同时测定了水溶液中共存的邻苯二酚、间苯二酚和对苯二酚的含量 ,回收率分别为 (1 0 0 1± 1 0 ) % ,(99 4± 1 4) % ,(1 0 0 5± 1 7) %。研究结果表明 :该方法定量快速准确 ,实验操作步骤简单 ,解决了在干扰物存在条件下三者很难同时分辨的问题。     

N-TiO2/ZnO复合纳米管阵列的掺杂机理及其光催化活性

以ZnO纳米柱阵列为模板, 采用溶胶-凝胶法制备出TiO2/ZnO和N掺杂TiO2/ZnO的复合纳米管阵列. 扫描电镜(SEM)、X射线光电子能谱(XPS)和紫外-可见漫反射吸收光谱(UV-Vis)的结果表明: 两种阵列的纳米管均为六角形结构, 直径约为100 nm, 壁厚约为20 nm; 在N-TiO2/ZnO复合纳米管阵列中, 掺入的N离子主要是以N-Ox、N-C和N-N的形式化学吸附在纳米管表面, 仅有少量的N离子以取代式掺杂的方式占据TiO2晶格O的位置; 表面N物种形成的表面态能级和取代式掺杂导致带隙的窄化, 增强了纳米管阵列的光吸收效率, 促进了光生载流子的分离. 光催化实验结果表明, N离子的掺杂有利于N-TiO2/ZnO复合纳米管阵列光催化活性的提高.     

Analysis of basic hair dyes by HPLC with on-line post-column photochemical derivatisation

Summary A reversed phase liquid chromatographic method is proposed for the analysis of basic hair dyes (raw materials and colourant formulations). The performance of the method was enhanced by introducing post-column on-line photochemical derivatisation in combination with a Diode Array Detector. On-line photoderivatisation provided an effective way of selectively transforming the analytes to compounds with different spectral properties. For each analyte two characteristic UV-Visible spectra (photoreactor on and off) were obtained with the same mobile phase and this information in combination with the chromatographic data (k' at pH 3.0 and 4.5) enabled the unambiguous identification of both commonly used, approved, and banned basic hair dyes. Additionally, this approach was found useful to improve the method sensitivity, allowing the determination of analytes present in low concentration (0.03%) in complex commercial formulations.This work constitutes part of the thesis for the Dottorato di Ricerche of Roberto Gotti.     

反相液相色谱质谱法分离鉴定3,4,6,7,9,10-6H-3,3,6,6-四甲基-9-对硝基苯基吖啶-1,8二酮

应用反相高效液相色谱法，分离和鉴定3，4，6，7，9，10－6H－3，3，6，6－四甲基－9－对硝基苯基吖啶－1，8－二酮（化合物Ⅰ），分离系统包括Zorbax SB C18及苯基柱，紫外检测器检测波长为285nm，等比和线性梯度淋洗，液相色谱－质谱联用和光导二极和列检测系统被用来鉴定主要化合物及其它杂质，此方法可达到分离效果好，灵敏度高。     

利用凝胶渗透色谱示差-紫外检测器联用测定丁苯共聚物的组成分布

将凝胶渗透色谱(GPC)中的示差与紫外检测器联用,测定了无规共聚丁苯橡胶和SBS三元嵌段共聚物中各级分的组成变化.实验方法选择中对比了两种浓度参数的确定方法,发现通过改变注射量来实现浓度变化的方法优于使用系列浓度样品的方法.分别测定标准样品在紫外和示差检测器上信号产生的时间间隔可以确定两个检测器上信号的时间差.根据紫外-示差检测器联用可以看到SBR无规共聚物和三嵌段SBS共聚物样品中每一个级分中随着相对分子质量的变化,苯乙烯含量的变化.     

An analysis of avidin, biotin and their interaction at attomole levels by voltammetric and chromatographic techniques

The electroanalytical determination of avidin in solution, in a carbon paste, and in a transgenic maize extract was performed in acidic medium at a carbon paste electrode (CPE). The oxidative voltammetric signal resulting from the presence of tyrosine and tryptophan in avidin was observed using square-wave voltammetry. The process could be used to determine avidin concentrations up to 3 fM (100 amol in 3 l drop) in solution, 700 fM (174 fmol in 250 l solution) in an avidin-modified electrode, and 174 nM in a maize seed extract. In the case of the avidin-modified CPE, several parameters were studied in order to optimize the measurements, such as electrode accumulation time, composition of the avidin-modified CPE, and the elution time of avidin. In addition, the avidin-modified electrode was used to detect biotin in solution (the detection limit was 7.6 pmol in a 6 l drop) and to detect biotin in a pharmaceutical drug after various solvent extraction procedures. Comparable studies for the detection of biotin were developed using HPLC with diode array detection (HPLC-DAD) and flow injection analysis with electrochemical detection, which allowed biotin to be detected at levels as low as 614 pM and 6.6 nM, respectively. The effects of applied potential, acetonitrile content, and flow rate of the mobile phase on the FIA-ED signal were also studied.     

组合电化学--电化学研究中的新策略

组合电化学是一种新的电化学研究策略，通过设计和构建大量多样性的电极阵列，并对其进行高通量筛选和表征，快速、高效地实现了体系的电化学研究。本文综述了近年来进行的组合电化学研究，重点介绍了组合光学筛选方法、组合电化学合成方法以及电化学平行筛选方法，并探讨了各种方法的优势和存在的问题。     

Removal of major interference sources in aqueous near-infrared spectroscopy techniques

This work describes a hybrid procedure for eliminating major interference sources in aqueous near-infrared (NIR) spectra, that include aqueous influence, noise, and systemic variations irrelevant to concentration. The scheme consists of two parts: extension of wavelet prism (WPe) and orthogonal signal correction (OSC). First, WPe is employed to remove variations due to aqueous absorbance and noise; then OSC is applied to remove systemic spectral variations irrelevant to concentration. Although water possesses strong absorption bands that overshadow and overlap the absorption bands of analytes, along with noise and systematic interference, successful calibration models can be generated by employing the method proposed here. We show that the elimination of major interference sources from the aqueous NIR spectra results in a substantial improvement in the precision of prediction, and reduces the required number of PLS components in the model. In addition, the strategy proposed here can be applied to various analytical data for quantitative purposes as well.